Accessories PNEG-914 Manual

6. Parts List
PNEG-914 Flex-Flo 47
Model 220, 300 and 350 Control Unit (FLX-4496) Parts List
Ref # Part # Description Qty
1 FLX-2017 Powerhead Drop 1
2 DC-884 Decal, Rotating Auger Hazard 2
3 FLX-4260 Model 220, 300, 350 Control Unit Body 1
4 AP-2213 Retaining Clip 4
5 S-4694 Chain #2 Weldless 1
6 S-3383 Hook #41 S-Hook 1-1/2" Long 3
7 FLX-5015-LB Flex-Flo Control Unit 1
8 FLX-4516 Electrical Box Bottom Drilled 1
9 FLX-4561 4 x 6 Electrical Box Gasket 1
10 FLX-4569 Back Plate, 4 x 6 Control Box 1
11 FLX-5017 Bracket, Terminal Block Mounting 1
12 FLX-5040
Terminal Block Assembly for Flex-Flo Control Unit 1
13 FLX-4517 Electrical Box Lid w/ Decal 1
14 FLX-4560 Electrical Box Lid 4 x 6 1
15 DC-2117 Decal, Flex-Flo Control 220V 1
16 S-995 Screw, MS #10-24 x 1" SS 4
17 S-7931 Hex Nut #10-24 SS 4
18 FLX-4620 Relay, Bracket f/ FLX-4619 1
19 FLX-4619 Relay, 4 Pole, ST, N.O., 240V 1
20 DC-1515 Decal, 208V/230V 3 PH Wire Label 1
21 S-7604 Light 250V Sealed Red Pilot 1
22 S-7707 Safety Limit Switch 1
23 S-6142 Switch, DPST ON-OFF Toggle 1
24 70-0129 Boot Switch Weather-Proof 1
25 S-8823 Screw, TCS23 #8-32 x 3/8" HWHS ZN Green 1
26 S-8183
Screw, MS #6-32 x 3/8" PHP ZN 6
27 S-8686 Screw, TCSF #6-32 x 3/8" PHP ZN 2
28 FLX-4522 Control Unit Base Assembly 1
29 FLX-2380 Small Diaphram Retainer 1
30 FLX-4410
Diaphram Assembly 1
31 FLX-4510 Control Unit Base - Sealed 1
32 S-849 Hex Nut #10-24 ZN Grade 2 4
33 S-3674 Flat Washer #10 x 7/32" I.D. x 1/2" O.D. x 18 Gauge SAE ZN Grade 2 4
34 S-2010
Nylock Nut #10-24 ZN Grade 2 4
35 DC-2124 Decal, ETL/Intertek Mark 1
36 S-6622
ON-OFF Back Plate 1
37 S-280 Screw, SDS #10-16 x 5/8" HWH ZN 5
38 S-7621
Screw, TCSF #10-32 HWH ZN 3/4" 4
39 FLX-4261 Control Box Access Door 1
40 DC-850 Decal, European Certification 1