Accessories PNEG-524 User Manual

5. Installation
PNEG-524 Roof Exhaust Fan 15
24" Roof Fan Mounting and Assembly of Fan, Adaptor and
Rainhood (Continued)
Figure 5F 24" Roof fan adaptor and template parts breakdown.
2. Place the roof sheet adaptor mounting template at the appropriate location for the roof fan. Move the
template as far up the roof sheet as possible, but allow for 1" minimum clearance between the roof
sheet rib and bottom of the template on each side.
3. Drill two (2) corner holes and bolt template in place.
4. Drill the remaining 11/32" mounting holes identified on the template.
Figure 5G The Rainhood Pre-Assembly