Accessories PNEG-1885

4. Installation Instructions

20 PNEG-1885 Special 105' 2 Ring Door for Use with Enhanced Stiffeners in 3

and 4

Ring

Outer Door Assembly (Continued)

Attach outer cover angle (NCWT0168) to the outer door weldment using 5/16" x 1-1/4" bolts (S-277),

nuts (S-396) and washers (S-845) for all connections. Attach hinge weldment (NCWT0165) and latch plate

(NCWT0166) to outer cover angle (NCWT0168). See detail D in Figure 4G for orientation. The outer cover

then attaches to the hinges with 3/8" x 4-1/2" bolt (S-1443), nuts (S-456) and washers (S-248).

Figure 4G

Assembled outer cover

(See Figure 4F on Page 19.)