Accessories PNEG-1802 User guide

4. Inside Ladder Installation
18 PNEG-1802 Inside Ladder Instructions
2.66" Corrugated Commercial Grain Bin
Inside Ladder Installation (without Stir-Ator)
Inside Ladder Placement
The inside ladder package includes the ladder, starter brackets and double the amount of standoff brackets.
Begin by positioning the ladder directly under the manhole roof panel as shown in
Figure 4H and install the
starter brackets as shown in
Figure 4I on Page 19 . Place the standoff brackets every 16" vertically on the
sidewall sheets using the horizontal seam holes for every other hole location. Use 5/16" x 3/4" bin bolts to
attach the standoff brackets to the sidewall of the grain bin.
Figure 4H