Accessories PNEG-1802 User guide

12 PNEG-1802 Inside Ladder Instructions
4. Inside Ladder Installation
2.66" Corrugated Farm Bin
Inside Ladder Installation (without Stir-Ator)
Inside Ladder Placement
The inside ladder package includes the ladders, starter brackets and double the amount of standoff
brackets. Begin by positioning the ladder directly under the manhole roof panel as shown in Figure 4A
and install the starter brackets as shown in Figure 4B on Page 13. Place the standoff brackets every
16" vertically on the sidewall sheets using the horizontal seam holes for every other hole location. Use
5/16" x 3/4" bin bolts to attach the standoff brackets to the sidewall of the grain bin.
NOTE: Refer to general detail information section on PNEG-1420 for additional details for standoff bracket
to ladder assembly.
Figure 4A