Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 61
7. Place clamp assembly down the column every 32" center to center. Be sure to mount C-channel
before putting nut onto the middle bolt of the clamp assembly. Do not put clamps less than 32" apart
at the base of the column. 36" Column shown as example. (See Figure 4AY.)
NOTE: * Reference dimension. For starting clamp assembly for substructure ladder mounting.
NOTE: Place clamp assembly down column with 32" spacing from center of middle hole to center of
middle hole.
Figure 4AY
Ref # Part # Description
A LDR-5342 C-Channel
B Clamp Assembly