Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 57
3. Assemble the safety cage bars (knee brace) to the posts and front and back angles using
5/16" hardware. (See Figure 4AU.)
NOTE: Make sure the intermediate platform is level before tightening hardware.
Figure 4AU
Ref # Part # Description
A LDR-5171 24" Safety Cage Bar
B LDR-5183 Intermediate Platform Back Post - Left
C LDR-5184 Intermediate Platform Back Post - Right
D LDR-5179 Intermediate Platform Front Post
E LDR-5175 Intermediate Platform Front Angle