Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
56 PNEG-1785 NCHT “X” Series Ladders
2. Assemble the platform wall brace to the intermediate platform front posts and wall angles using
5/16" x 3/4" bin bolt (S-275) (H) and flange nut (S-3611) (F). (See Figure 4AT.)
Attach intermediate (large and small) handrail to handrail post using 5/16" x 3/4" bin bolt (S-275) (H)
and flange nut (S-3611) (F).
Attach upper handrails to platform post using 5/16" x 2" bolt (S-7877) (E) and flange nut (S-3611) (F).
Attach the platform gate bracket to the gate before attaching it to the platform back post with
5/16" x 3/4" bin bolt (S-275) (H) and flange nut (S-3611) (F).
Attach safety gate assembly to intermediate platform door bracket using 5/16" x 3/4" bin bolt (S-275)
(H) and flange nut (S-3611) (F).
Figure 4AT
Ref # Part # Description Ref # Part # Description
A LDR-5179 Intermediate Platform Front Post H S-275 5/16" x 3/4" Bin Bolt
B LDR-5182 Intermediate Platform Top Handrail I LDR-5185 Intermediate Platform Door Bracket
C LDR-4088 Small Intermediate Handrail J LDR-5183 Intermediate Platform Back Post - Left
D LDR-4087 Large Intermediate Handrail
K LDR-5174 Intermediate Platform Bracket - Left
E S-7877 5/16" x 2" Flange Bolt L LDR-5168 Ladder Sidewall Angle
F S-3611 5/16" Flange Nut
M LDR-5206 Eave Platform Wall Brace
G LDR-5218 Ladder Safety Gate N LDR-5173 Intermediate Platform Bracket - Right