Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 49
11. Attach each end of the wall angle (LDR-5168) (B) to C-channel (LDR-5342) (A) using 5/16" x 3/4"
bin bolt (S-275) (C) and flange nut (S-3611) (D). Use washer on bolt head side of C-channel
(LDR-5342) (A). (See Figure 4AM.)
NOTE: Do not use same hole as platform brace.
Figure 4AM
Ref # Part # Description
A LDR-5342 C-Channel
B LDR-5168 Ladder Sidewall Angle
C S-275 5/16" x 3/4" Bin Bolt
D S-3611 5/16" Flange Nut