Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
44 PNEG-1785 NCHT “X” Series Ladders
5. Figure 4AH shows assembly of narrow safety cage bracket, cage hoops, cage splice brackets and
ladder flares to platform post.
NOTE: Make sure the ladder flares are vertical and parallel to the platform posts by adjusting the
splice brackets. The ladder should be square to the platform.
6. Figure 4AH shows attachment of intermediate platform ladder bracket to wall bracket.
NOTE: Do not mix up left and right intermediate platform ladder bracket.
Attach intermediate platform ladder bracket to wall bracket using 5/16" x 3/4" bin bolt (S-275) (G) and
flange nut (S-3611) (H).
Figure 4AH
Ref # Part # Description
A LDR-5164 Safety Cage Hoop
B LDR-5167 Safety Cage Hoop Splice
C LDR-5163 Safety Cage Narrow Bracket
D LDR-5161 Formed Ladder Flare
E LDR-5178 Intermediate Platform Ladder Bracket - Left
F LDR-5177 Intermediate Platform Ladder Bracket - Right
G S-275 5/16" x 3/4" Bin Bolt
H S-3611 5/16" Flange Nut