Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 43
4. Figure 4AG shows attachment of intermediate platform door bracket to platform post. Also shown
attachment of safety gate to intermediate platform door bracket.
Attach safety gate to intermediate platform door bracket using 5/16" x 3/4" bin bolt (S-275) (C) and
flange nut (S-3611) (D). Attach using all four (4) holes in each hinge plate.
Attach intermediate platform door bracket to platform post using 5/16" x 3/4" bin bolt (S-275) (C) and
flange nut (S-3611) (D).
Figure 4AG
Ref # Part # Description
A LDR-5218 Safety Gate Assembly
B LDR-5185 Intermediate Platform Door Bracket
C S-275 5/16" x 3/4" Bin Bolt
D S-3611 5/16" Flange Nut