Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
28 PNEG-1785 NCHT “X” Series Ladders
2. Figure 4P shows the attachment of ladder standoff bracket to the platform bracket 5/16" x 3/4" bin
bolt (S-275) (B) and flange nut (S-3611) (C) and the orientation of the two (2) standoff brackets.
Adjust length based upon the wall angle placement.
NOTE: Ladder standoff for both left and right hand ladders are sent with platform. Only use
LDR-5385 for the right hand ladder orientation.
Figure 4P
Ref #
Part #
Description
15'-21' 24'-36'
A LDR-5385 LDR-5385 Ladder Standoff Bracket
B S-275 S-275 5/16" x 3/4" Bin Bolt
C S-3611 S-3611 5/16" Flange Nut