Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 23
11. Attach wall angle to the sidewall sheet using the hole 9-3/8" from the stiffener hole pattern with
3/8" hardware. Assemble the wall bracket to the wall angle using 3/8" x 1" bolt (S-7927) (A) and
nut (S-9373) (B) and tighten. Adjust connection of wall bracket to standoff bracket if needed. Also
adjust length of the standoff bracket if needed. (See Figure 4K.)
Figure 4K
Ref # Part # Description
A S-7927 3/8" x 1" Flange Bolt
B S-9373 3/8" Flange Nut
C LDR-5168 Ladder Sidewall Angle
D LDR-5169 Ladder Sidewall Bracket