Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
22 PNEG-1785 NCHT “X” Series Ladders
9. Figure 4I shows the attachment of ladder standoff bracket to the platform bracket using 5/16" x 3/4"
bin bolt (S-275) (B) and flange nut (S-3611) (C) and the orientation of the two (2) standoff brackets.
Adjust length based upon the wall angle placement.
Figure 4I
10. Figure 4J shows the attachment of the platform wall bracket to the standoff brackets using
5/16" x 3/4" bin bolt (S-275) (B) and flange nut (S-3611) (C).
Figure 4J
Ref #
Part #
Description
15'-21' 24'-36'
A LDR-5357 LDR-5357 Ladder Standoff Bracket
B S-275 S-275 5/16" x 3/4" Bin Bolt
C S-3611 S-3611 5/16" Flange Nut
Ref #
Part #
Description
15'-21' 24'-36'
A LDR-5174 LDR-5174 Platform Wall Bracket
B S-275 S-275 5/16" x 3/4" Bin Bolt
C S-3611 S-3611 5/16" Flange Nut