Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
PNEG-1785 NCHT “X” Series Ladders 17
4. Attach middle platform bracket (LDR-5362) (A) to platform pans using 5/16" x 3/4" bin bolt (S-275)
(B) and flange nut (S-3611) (C). The same 5/16" hardware is used at every location where the
two (2) pans on the bottom side of the platform. (See Figure 4D.)
Figure 4D
NOTE: Use same hardware at locations where the platform bracket does not bolt to the pans.
Ref # Part # Description
A LDR-5362 Platform Bracket
B S-275 5/16" x 3/4" Bin Bolt
C S-3611 5/16" Flange Nut