Accessories PNEG-1785 Owner's manual

4. Assembly Instructions
16 PNEG-1785 NCHT “X” Series Ladders
3. Assemble platform pans to substructure components using 5/16" x 3/4" truss head bolt (S-4303) (D)
and flange nut (S-3611) (E). (See Figure 4C.)
NOTE: Components for both 15'-21' and 24'-36' eave platforms are shown in Figure 4C.
Figure 4C
Ref #
Part #
Description
15'-21' 24'-36'
A LDR-5367 LDR-5363 Eave Platform Pan Left
B LDR-5368 LDR-5364 Eave Platform Pan Right
C STX-0142 STX-0142 Eave Platform Toe Board
D S-4303 S-4303 5/16" x 3/4" Truss Head Bolt
E S-3611 S-3611 5/16" Flange Nut