Accessories PNEG-1753 Owner's manual

3. Installation in Newly Constructed Tanks
10 PNEG-1753 Fall Restraint Reinforcement Kit
135'-50K Roof Fall Restraint Reinforcement Installation Instructions
for CRP-7113
The center collar and one eave tension plate will need to be drilled to allow for the assembly of this
reinforcement kit.
1. Install CRP-7007 to every roof beam stiffener as shown in Figure 3E using four (4) 3/8" x 1-1/2"
grade 8 flange bolts (S-7928) and flange nuts (S-9373).
Figure 3E