Accessories PNEG-1742 Owner's manual

5. Assembly Drawings
PNEG-1742 VTDL-48 - 8 x 9 Door Assembly 25
Outer Cover Assembly
Figure 5J
NOTE: Attach angles to columns and header with 3/8" x 1" bin bolts. The outer cover hinge brackets will attach to the outside of the column outer cover flanges. Attach the center post to the header and threshold weldments with 3/8" x 1" bin bolts. Attach reinforcement channels, outer cover handles and latch brackets to the outer cover with 3/8" x 1" bin bolts. Place outer cover assembly in position and insert the hinge pin through the hinge weldment and bracket. Secure the hinge pin with cotter pin and washer. Be sure the door cover opens and closes smoothly. Adjust hinges and latches as necessary. Open outer cover and apply foam seal strip all along outer edge of cover. Caulk as necessary to seal outer cover.