Accessories PNEG-1742 Owner's manual

5. Assembly Drawings
PNEG-1742 VTDL-48 - 8 x 9 Door Assembly 23
Stiffener/Sidewall Attachment
Figure 5H
NOTE: Install standard base stiffeners above header beam as shown. Shim stiffeners as necessary and tighten all sidewall and stiffener bolts around the door. Field weld base stiffeners to header beam. It may be necessary too trim the stiffener base plate to match the outer edge of the header beam. Install all hinge pins as shown in detail D. Remove door panel bolts and make sure all door panels swing freely.