Accessories PNEG-1738 User Manual

4. Assembly Instructions
48 PNEG-1738 15'-135' “X” Series Roof Stairs, Peak and Manway Guard
“X” Series Platform Assembly - Twin Bin Platform
1. Figure 4AD shows the assembly of the platform supports. Use 5/16" hardware at all the connection
points. (The bin wall and platform floor is hidden for clarity. Platform floor will have to be attached
at the same time as support angles.)
Figure 4AD
2. Figure 4AE shows the assembly of the platform post, handrail post, toe plate, platform corner post
and platform floor system. This must all be assembled at the same time using 5/16" hardware.
Figure 4AE