Accessories PNEG-1738 User Manual

4. Assembly Instructions
PNEG-1738 15'-135' “X” Series Roof Stairs, Peak and Manway Guard 45
Roof Stair Only Eave Platform Sub-Assemblies (Continued)
“X” Series Platform Assembly - Reverse
1. Figure 4Z shows the assembly of the platform supports. Use 5/16" hardware at all the connection
points. (The bin wall and platform floor is hidden for clarity. Platform floor will have to be attached at
the same time as support angles.)
Figure 4Z
2. Figure 4AA shows the assembly of the platform toe plate, handrail post, platform post and platform
floor system. This must all be assembled at the same time using 5/16" hardware.
Figure 4AA