Accessories PNEG-1721 Instruction Manual

3. Assembly and Installation Instructions
PNEG-1721 Peak Walk Around Assembly 15
Peak Walk Around Installation Instructions
1. Before installing the Peak Walk Around Assembly on the roof, assemble 7 ea. brackets (GT1-5130)
on the roof sheet at the third hole from outside of the roof as shown in Figure 3M.
Figure 3M
2. Install the Peak Walk Around Assembly on the roof such a way, the entry would align with the
ladder. (See Figure 3N.) Assemble transition supports (GT1-5131 and GT1-5132) using
5/16" hardware as shown in Figure 3N.
Figure 3N