Accessories PNEG-1721 Instruction Manual

3. Assembly and Installation Instructions
10 PNEG-1721 Peak Walk Around Assembly
Peak Walk Around Assembly Instructions (GT4-5061) (Continued)
1. Begin assembling vertical handrail supports with horizontal handrail supports.
2. Assemble vertical handrail support (GT1-5139) with the other vertical handrail support (GT1-5141)
using 5/16" hardware such a way, that both the 3/16" holes align on each component.
(See Figure 3C.)
Figure 3C
3. Assemble vertical handrail support (GT1-5140), short horizontal handrail support (GT1-5145) using
5/16" hardware. (See Figure 3D.)
Figure 3D