Accessories PNEG-1655 User Manual

6. Assembly Drawings
30 PNEG-1655 VTDL-135' - 8' x 9' Door Assembly w/ Manway
Outer Cover Assembly
Figure 6M
NOTE: Attach angles to columns and header with 3/8" x 1" bin bolts. The outer cover hinge brackets will attach to the outside of the column outer cover flanges. Attach the center post to the header and threshold weldments with 3/8" x 1" bolts. Attach reinforcement channels, outer cover handle and latch brackets to the outer cover with 3/8" x 1" bin bolts. Place outer cover assembly in position and insert the hinge pin through the hinge weldment and bracket. Secure hinge pin with cotter pin and washer. Be sure door opens and closes smoothly. Adjust hinges and latches as necessary. Open outer door covers and apply foam seal strip all around outer cover. Caulk as necessary to seal outer cover.