Accessories PNEG-1655 User Manual

6. Assembly Drawings
24 PNEG-1655 VTDL-135' - 8' x 9' Door Assembly w/ Manway
Door Panel Assembly
Figure 6G
Door panels should be assembled as shown. Attach the door panels to the columns, header and threshold with 1" x 3-1/2" grade 8 bolts with washer on each side. Bolt head will be on the outside of the connection. Use 1" x 3-1/2" grade 8 bolts at hinge locations. Use foam seal strip on back side of door panels. Apply caulking between all door panel splices. Attach hinge weldments to door panels with 3/8" x 1-1/2" bin bolts. Bolt head and sealing washer should be on the outside for these connections. Refer to Page 25 and Page 26
for door panel to frame assembly.