Accessories PNEG-1655 User Manual

6. Assembly Drawings
22 PNEG-1655 VTDL-135' - 8' x 9' Door Assembly w/ Manway
Header Beam Connection Details
Figure 6E
NOTE: Install header beam onto columns as shown on Page 21. Use 1" x 3-1/2" grade 8 bolts with washer on each side. Insert bolts from the column side
and tighten. Access cover plates VTDL-0246 will be welded onto the inside and outside of the columns at the access opening after the door is installed. Be sure that the edge of the threshold plate is aligned with the edge of the columns. Field weld threshold plates, sidewall plates and door panel plates after door is completely installed.