Accessories PNEG-1451 Owner manual

6. 2.66" Corrugated Commercial Hopper Tank 10-22 Rings
PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks 47
Right Hand Platform and Platform Support Assembly
NOTE: Mount the platform supports on the bin first. Next, assemble the platform floor onto the support
frame. Do not tighten platform support to floor brace bolts until the floor and toe plates are secure.
Assemble the platform support frame using 5/16" x 3/4" truss head bolts and nuts. (See Figure 5I
on Page 28.) When attaching the platform mounting angles to the sidewall, locate the mounting angles
according to the instructions on previous pages. Align holes on the platform floor with the holes on the
platform supports and bolt together using 5/16" x 3/4" truss head bolts and nuts. Attach platform toe plates
at the same time as attaching the platform floor. The vertical entrance angle bolts to the platform floor,
toe plate and platform support. The handrail post bolts to the platform floor and toe plate as shown
in Figure 6K.
Figure 6J Right Hand Platform Support Assembly
Figure 6K Right Hand Platform