Accessories PNEG-1451 Owner manual

5. 2.66" Corrugated Commercial Hopper Tank 4-9 Rings
PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks 21
Ladder, Safety Cage and Platform Location Chart
For Section A, find the proper ring grain bin and use the number of ladders and safety cages indicated.
See Chart below (Section A). For Section B, find the proper diameter grain bin and hopper slope, then use
the number of ladders and safety cages indicated. See Chart below (Section B).
NOTE: The 32" safety cage section must be installed in Section A of the ladder system. DO NOT install
the 32" verticals in the eave or access door safety cage hoop assembly. The eave and access door
safety cage hoop assembly use the 48" verticals.
Rings
456789
Section A
Platform Located in Ring: 2 2 2 2 2 2
4' Ladder Section 3 4 4 5 6 6
Safety Cage 32" Section 0 1 2 0 1 2
Safety Cage 48" Section 000222
Dimension A 96" 128" 160" 192" 224" 256"
Diameter
12' 12' 15' 15' 18' 18' 21' 21' 24' 27' 27' 30' 30' 36' 36'
Section B
Hopper Slope: 45 60 45 60 45 60 45 60 45 40 45 40 45 40 45
4' Ladder Section 4 55657576566767
Bell Safety Cage 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1
Safety Cage 48" Section0 00101020010112
Bell Safety Cage Size N/A 24" N/A 24" 24" 48" 48" 24" 48" 48" 24" 48" 48" 48" 48"
Dimension B 91" 128" 108" 167" 128" 198" 144" 229" 162" 142" 179" 156" 195" 187" 236"