Accessories PNEG-1364 User Manual

5. Assembly Drawings
20 PNEG-1364 42'-60' 4" Corrugated 2 Ring Door
Outer Cover Assembly
Figure 5E
IMPORTANT: Outer cover decals must be in place upon door installation. DC-GBC-1A and DC-GBC-1S must be placed on the inner side of the outer cover. DC-GBC-2A, DC-GBC-2S and DC-1754 must be placed on the outer side of the outer cover. If these decals are absent or damaged call GSI for free replacement.
Apply rope caulk to outer cover angles prior to attaching to the frame weldment. Use 5/16" hardware for all connections. Hinge/outer cover/ reinforcement channel connections will use 5/16" x 1-1/4" bin bolts. All other connections will use 5/16" x 3/4" bin bolts. Place sealing washer between outer cover and latch (WD-033), adjust latches and hinges as necessary to allow outer cover to open and close smoothly.