Accessories PNEG-1336D Manual

5. Door Assembly
PNEG-1336D VTDL-72-8X9D - VTDL-78-8X9D Door 21
Header Beam Connection Details
NOTE: INSTALL HEADER BEAM ONTO COLUMNS AS SHOWN ON PAGE 20. USE 1" x 3-1/2" GRADE 8 BOLTS WITH WASHER ON EACH SIDE. INSERT BOLT FROM THE COLUMN SIDE AND TIGHTEN. ACCESS COVER PLATES (VTDL-0246) WILL BE WELDED ONTO THE INSIDE AND OUTSIDE OF THE COLUMNS AT THE ACCESS OPENING AFTER THE DOOR IS INSTALLED. BE SURE THAT THE EDGE OF THE THRESHOLD PLATE IS ALIGNED WITH THE EDGE OF THE COLUMNS. FIELD WELD THRESHOLD PLATES, SIDEWALL PLATES, AND DOOR PANEL PLATES AFTER DOOR IS COMPLETELY INSTALLED.