Accessories PNEG-044 User Manual

3. 105' Roof Erection
22 PNEG-044 105' Roof Assembly
Figure 3L
Installation instructions: Attach left and right bracket assemblies to roof beams as shown in Detail 16 on Page 23.
Adjust bracket position along the roof beam to the desired radius. Attach support channel to the left and right bracket
assemblies with 3/8" x 1-1/2" flange head bolts, washers and nuts. Attach hanging bracket to the support channel with
3/8" x 1-1/2" flange head bolts, washers and nuts. Tighten all 1/2" bolts to a minimum torque of 120 ft. lbs.
Right bracket assembly
(See Detail 16 on Page 23.)
Left bracket assembly
(See Detail 16 on Page 23.)