User Guide

LF1031-INS-LAB-RevD12

8. Screw the push handles into the mast and

tighten them.

9. Insert spreader bar attachment rod into spreader

bar. Insert spreader bar rod into the U-bracket at

the end of the boom. Align holes. Insert spreader

bar attachment bolt and tighten.

10. Install the base adjustment handle in the socket

located behind the mast sleeve on the base. With

base handle to the far right position, insert and

tighten base attachment bolt to ensure that the

handle is rmly attached to the base.

11. LF1031 only: For shipping purposes, the boom is

in its lowest position. To elevate, turn the pump

knob clockwise until hand tight and operate the

pump handle.

The LF1031 lift is now ready for use.

LF1041 lift: continue to next page.

install push handles

install spreader bar

install base adjustment handle

elevate boom