MULTIFUNCTION SHOWER HEAD=-Ceiling Mtd. / AQUA-SENSE q G Q-8220 LED IOG 2843.50 1 Rev.
MULTIFUNCTION SHOWER HEAD=-Ceiling Mtd. / For assembly you will need: z wrench, z level, z drill, z ruler, z silicone, z teflon tape, z pencil, z screwdrivers, z pipe wrench, z hacksaw, z hammer.
MULTIFUNCTION SHOWER HEAD=-Ceiling Mtd. / Installation 10 Please open the box 13 Power line: use the same color 11 12 LED line: use the same color close the screw from the connector Close the screw for the electric line 14 15 Close the screw from the connector and the screw for the line inlet Close the box 9 IOG 2843.50 3 Rev.
MULTIFUNCTION SHOWER HEAD=-Ceiling Mtd. / Controller # MAINTENANCE Clean water guarantees that a mixer equipped with ceramic flow regulators will work correctly, i.e. th water should not contain any impurities such as sand, boiler scale etc. Because of this, the pipe system should be equipped with sieve filters or, if there is no such possibility, with individual cut-off valves with filters designed for such units.
