Product Manual

4077-INS-LAB-RevB09 30

Caution: Do not pour liquids on the monitor while cleaning.

Caution: Use a clean, damp cloth to wipe up any agent remaining on the monitor.

Cleanser

The following cleaning solutions are recommended for monitor and accessories:

Recommended Cleaning Solution:

Component:

Soft Soap Tensides Ethylate Acetaldehyde

Monitor

√ √ √ √

Ultrasound Transducer

√ √ √ √

TOCO Transducer

√ √ √ √

Belt

√ √ √ √

Remote Marker

√ √ √ √

Note: The monitor surface can be cleaned with hospital-grade ethanol, then air dried or

dried with a clean, lint-free cloth.

Note: For details about the effectiveness of controlling infectious disease using these

chemical agents, please contact your facility's infectious disease expert.

1. Removing all dust from the exterior surface of the Fetal Monitor with a clean, soft

brush or cloth.

2. Use a clean, soft brush to dislodge any dirt on or around the connectors and panel

edges.

3. Remove dirt with a clean, soft cloth, slightly dampened with a mild detergent solution

or 70% ethanol or isopropranol.

CARE AND CLEANING OF ACCESSORIES

To avoid damage to the transducer:

WARNING: NEVER use transducers to monitor patients underwater.

Caution: Always wipe gel from the transducer after use.

Caution: Although transducers are designed for durability, they should be handled

with care. Be especially careful with the cover, piezoelectric crystals and mechani-

cal movement.

Caution: The cover is made of soft plastic; do not touch it with hard or sharp ob-

jects.

Caution: Do not ﬂex the cables excessively.