Product Manual

4077-INS-LAB-RevB09 21
FETAL MONITORING CONFIGURATION
Figure follows.
FetalMonitorconfigurationmenu
• BedID: 1-99 (optional).
• UABaseline: Uterine activity baseline; 5-20 optional, the default is 10, and the incre-
ment is 5.
• FMSource: Fetal movement count chooses patient remote mark or result of AFM
analysis; Manual and Automatic optional, and the default is Manual.
• AFM Enabled: ON and OFF optional, and the default is ON.
• AFMThreshold: Threshold of AFM, the parameter of determining AFM; 0-100 optional,
and the default is 30, and the increment is 10.
• AFMGain: To adjust the signal amplitude of AFM trend for the convenience of obser-
vation; 1, 2, 3, 4 optional, and the default is 4.