Product Manual

4077-INS-LAB-RevB09 14
Recorder
If the transducers and connectors are correctly connected, press the key to print. The
date, time, paper speed, and bed No., etc. will be printed at the beginning of the paper.
After printing the information mentioned above, “FHR”, “AFM”, “TOCO ext”/“TOCO int”
will be printed at the relevant trace. In the process of printing after record-
ing, the recorder will print system time once every 10 minutes and “FHR”, “AFM”,
“TOCO ext”/“TOCO int” once every 8 minutes (see the following examples of printing
patterns).
The FHR trace is very broad.
If the key is pressed, the symbol of TOCO zero is printed. If the key is pressed, the
“↓” symbol will be printed at the trace. If an alarm occurs, the symbol will be printed
at the trace.
Note: Ensure that all parameters are correctly set before printing; DO NOT try to change
parameters while printing. The printing speed cannot be changed during the process of
printing.
example of printing pattern (USA standard record paper)