Tus neeg siv phau ntawv

54
● Remove the water tank and clean it under running water. After that, re-insert the water tank.
● Fill water in the tank. 2.5
litres at the maximum.
● Press the
ON/OFF-button .
● The unit is heating up.
● The unit is ready for opera-
tion.
● Put one cup under the
hot-water wand.
● Open the control dial.
Initial operation
Note: Vent the unit prior to initial commissioning or after you have not used the unit for a long
period of time. Do not insert the group handle for venting.
Venting
● Insert the plug into the socket.
● Let the air escape until a constant water jet runs through. ● Turn off the control dial.