Tus neeg siv phau ntawv
50
Unpacking
When unpacking the unit, proceed as follows:
● Pull the unit out of the cardboard box.
● Remove all packaging and possible stickers on the unit (do not remove
the name plate).
Requirements on the installation location
For safe and fault-free operation of the unit, the following has to observed
during installation:
● Use a rm, even, horizontal, non-slip and heat resistant surface with a
sufcient load capacity.
● Select an installation location in such a way that children cannot reach
any hot surfaces of the unit.
● The unit is not designed for installation in a wall or a built-in cupboard.
● Do not set up the unit in a hot, wet or moist environment.
● The power outlet must be easily accessible so that the power cable can be
quickly removed in case of emergency.