Operation Manual

42
Espresso Machine ES 80 / ES 81
EN
cautioN
Never turn the milk frother/hot
water nozzle towards yourself
or any other person. DANGER
OF BURNS!
To move the milk frother/hot
water nozzle, always use the
handle; never touch the milk
frother/hot water nozzle on the
pipe after using. It becomes
very hot!
 Turn the control knob open.
 Hot water now ows from the
nozzle into the container.
 After completing the process,
close the rotary control again.
Advanced Programming Op-
tions
Espresso Thermoblock
Temperature
The water temperature of this
unit has been calibrated to pre-
cise temperature of 92°C at the
group head. The temperature of
the water at the group head can
be modied in increments of 2°C
up and down should it be desi-
red.
To do this you need to follow the
instructions below:
Press the "COFFEE" button for 3
seconds. While still holding down
the "COFFEE"button briey press
the "POWER" button and re-
lease. Release "COFFEE"button.
This activates the programmabi-
lity of the Espresso Temperature
and to signal this, the unit will
output the current setting with a
sequence fo beeps.
Beep Sequence Setting
3 short Beeps + 3
2 short Beeps + 2
1 short Beep + 1
1 short und 1
long Beep
Factory Setting
1 long Beep - 1
2 long Beeps - 2
3 long Beeps - 3
important!
The lights behind the
"STEAM" and "HOT WA-
TER" buttons will start as-
hing.
Within 30 seconds press and re-
lease one of the ashing buttons
depending on the required tem-
perature adjustment.
Up (+) a setting : Press "HOT WA-
TER"
Down (-) a setting : Press
"STEAM"
important!
When you have selected a
new temperature setting the
unit will sound a sequence
of beeps to indicate the new
temperature setting.
To save your settings press and