Operation Manual

5
EN
• Take the appliance out of the carton.
• Remove all pieces of the packaging.
• Remove any possibly extant labels on the cof-
fee grinder (do not remove the rating plate).
Requirements for the installation location
For safe and awless operation of the appli-
ance, the place of location must meet these
prerequisites:
• The appliance must be set up on a rm, at,
level, non-slip and heat resistant base that
has sufcient load bearing capacity.
• Select the place of location so that children
cannot reach the surfaces of the appliance.
• The appliance is not intended for installation
in a wall or a built-in cupboard.
• Do not set up the appliance in a hot, wet or
moist environment.
• The electric socket must be readily accessi-
ble so that the power cord can be easily un-
plugged.
Operating and speed settings
• Maximum operating time is 4 minutes. After
these 4 minutes please let the appliance cool
down to room temperature and start again.
Grind setting
You can inuence the composition of the coffee
with various grind settings.
The wide range of grind settings allows you to
make a precise adjustment.
Notice:
• The ner the coffee grounds, the longer the
grinding process takes.
• If you use a ne grind level, it is possible that
the coffee grounds clump together. During
grinding, slightly knock on the coffee bean
container cover so that any possible coffee
grounds clumps do not block the grinding.
• Accurate information on the grind setting can
not be made, since many factors such as type
of coffee / bean, room temperature, perso-
nal taste, etc. play a role.