EN Instruction Manual Coffee Grinder Kaffeemühle / Coffee grinder CM 70 Serie
EN Table of content Safety Instructions........................................................ 3 Before the first use....................................................... 4 Unpacking................................................................... 5 Requirements for the installation location.................... 5 Operating and speed settings....................................... 5 Grind setting ............................................................... 5 Grinding coffee...........................
EN Safety Instructions This appliance complies with the statutory safety regulations. Improper use can, however, lead to personal injury and property damage. To handle the appliance safely, follow the instructions below: • Check the appliance for external, visible damage to the housing, the connector cable and the plug before using it. Do not put a damaged appliance into operation.
EN not use the appliance if the rotating sieve or the protecting cover is damaged or has visible cracks. • The appliance is not intended to be used with an external timer or a separate telecontrol system. • This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residental type environments; bed and breakfast type environments.
EN Unpacking To unpack the unit, proceed as below: • Take the unit out of the carton. • Remove all pieces of the packing. • Remove any possibly extant labels on the coffee grinder (do not remove the rating plate). Requirements for the installation location For safe and flawless operation of the unit, the place of location must meet these prerequisites: • The unit must be set up on a firm, flat, level, non-slip and heat resistant base that has sufficient load bearing capacity.
EN Grinding coffee • Plug the plug into the electric socket. • Put the group handle bracket on the bracket. • Fill the coffee bean container with coffee beans. Always only use whole coffee beans. Fill the coffee grounds container regularly with coffee beans. Constant weight is important to ensure smooth grinding. • Slide the coffee bean container or the grouple handle between the group handle bracket. • Press the coffee grounds container or groupe handle on the button between the groupe handle bracket.
• You can only remove the coffee bean container when no beans are left in the container. • Turn • Press • Turn EN the grind adjustment collar to grind setting 25. the button on the backside of the unit. the grind adjustment collar counter-clockwise until the marks point to each other. • Release the button. • During the removing of the coffee bean conatiner, hold the grind adjustment collar. • Clean the coffee bean container and coffee grounds container with warm water and a little detergent.
EN • Clean the burr using the burrcleaning brush. • Once everything is cleaned, return the grind adjustment collar to its position in the motor base. • With the grind adjustment collar in hand align the arrow on the collar with the arrow on the rear of the motor base, press down. • Replace the coffee bean container back into position and turn clockwise to the desired grind setting.
EN guarantee unless we are responsible. Damages arising from a repair not carried out by us or one of our representatives are excluded from the guarantee. In the case of justified claims, we will repair the defective product or exchange it for an undamaged product at our discretion.
