User Manual

9 10
11
Ⅹ.Common faults&reasons and how to solve(Play as remote shutter release)
Ⅸ.Common faults&reasons and how to solve (Control the speedlite)
Common Faults
Reasons How to solve
Press down the test button of
transmitter, transmitting
indicator is off
After set up the transmitter on
camera hotshoe holder, as well as
press down the camera shutter
release button,but the transmitting
indicator is off
Press down the test button
of transmitter,transmitting
indicator is on,but the
receiving indicator is off
Press down the test button
of transmitter,transmitting
indicator is on,and the
receiving indicator is also
on,but the speedlite can
not work
Battery energy(12v-23A) is not
enough
Test button is damaged
Transmitter is damaged
Camera function keys are not
set up well
Receiver batteries are not set
up well or energy is not enough
Receiver power switch is not
turned on
The channel switches between
receiver and transmitter are not
adjusted same status
Speedlite is not set up with
batteries
Speedlite is damaged
Metal point of the speedlite
doesn't touch well with the
receiver hotshoe parts
Replace new battery
Ask for help from professional
person to repair
Set up the camera function
keys well
Check the metal point out of
transmitter
Distinguish the cathode&anode
of batteries to set up again or
replace new batteries
Power on the receiver switch
Adjust the channel switches
between receiver and transmitter
at same status
Set up the batteries into speedlite
well
Firstly check the speedlite is good
or not
Ask for help from professional to
repair
Common Faults
Reasons How to solve
Press down the button of
transmitter,transmitting
indicator is off
Press down the shutter
release button of transmitter,
transmitting indicator is on,
but the receiving indicator is
off
Press down the shutter
release button of transmitter,
transmitting indicator is on,
and the receiving indicator is
also on,but the camera can
not take the focus action.
Battery energy(12v-23A) is not
enough
Indicator is damaged or the
button is damaged
Receiver batteries are not set
up well or energy is not enough
Receiver power switch is not
turned on
The channel switches between
receiver and transmitter are not
adjusted same status
Camera power switch is not
turned on
Camera shutter release cable
is not connected well
Camera or lens focus model is
not set up well
Shutter release cable or camera
shutter socket is damaged
Replace new battery
Ask for help from professional
person to repair
Distinguish the cathode&anode
of batteries to set up again or
replace new batteries
Power on the receiver switch,make
power indicstor become green
Adjust the channel switches
between receiver and transmitter
at same status
Power on the camera switch
Connect the camera shtter
release cable well
Set up the camera and lens
focus models to auto model
Replace new shutter release
cable
Turn the power switch to"ON"
Receiver power switch hasn't
turned on
Turn the power switch to"ON"
Transmitter power switch isn't
turned on
Transmitter contact point doesn't
touch well with the camera hotshoe
Ⅷ.Common faults & reasons and how to solve (Trigger the studio strobe)
Press down the test button
of transmitter, transmitting
indicator is off
After set up the transmitter on
camera hotshoe holder,as well
as press down the camera shutter
release button,but the transmitting
indicator is off
Press down the test button
of transmitter,transmitting
indicator is on,but the
receiving indicator is off
Press down the test button
of transmitter,transmitting
indicator is on,and the
receiving indicator is also
on,but the studio strobe
can not work
Common Faults
Reasons How to solve
Battery energy(12v-23A) is not
enough
Test button is damaged
Transmitter is damaged
Camera function keys are not set
up well
Transmitter contact point doesn't
touch well with the camera hotshoe
Receiver batteries are not set
well or energy is not enough
up
Receiver power switch is not
turned on
The channel switches between
receiver and transmitter are not
adjusted same status
Studio Strobe power & charging
switches are not turned on
Studio strobe is damaged
Strobe connecting cable is
damaged
Replace new battery
Ask for help from professional
person to repair
Set up the camera function
keys well
Check the metal point out of
transmitter
Distinguish the cathode&anode
of batteries to set up again or
replace new batteries
Power on the receiver switch
Adjust the channel switches
between receiver and
transmitter at same status
Turn on the studio strobe
power and charging switches
Firstly check the studio strobe
is good or not
change new studio flash
cable
Transmitter power switch isn't
turned on
Turn the power switch to"ON"