Service Manual User guide

POWER BRAKE MASTER CYLINDER REPAIR
1.0 REMOVING BRAKE VALVE FROM VEHICLE AND
SEPARATlNG CYLINDER RESERVOIR SECTION
FROM POWER ASSIST SECTION. Refer to
Figures 20 & 21.
1.1 Remove Brake Valve from vehicle by dis-
connecting necessary fluid lines, dis-
connecting push rod, and removing
mounting bolts. Drain fluid from
assembly.
1.2 Separate Cylinder Reservoir Section from
Power Assist Section by removing three
cap screws and three lock-washers.
20
FIGURE 20
FIGURE 21