Service Manual User guide

Badly worn, rusted and corroded rims and components are
dangerous and should be replaced with new
parts.
Such hazards prevent proper fit of components, and can
cause difficult tire mounting.
Replace Worn, Rusted & Corroded
Rim Parts
Replace Cracked & Broken
Rims and Components
Replace Distorted Rims &
Components
Distorted rims and components will not properly lock
together. They should be replaced.
This hazard, besides making the tire/rim assembly unsafe
through improper fit, may cause difficult tire mounting.
Fatigue-cracked or broken rims and components must be
replaced. Periodically inspect all rims and components for
signs of fatigue cracks or breakage.
16
FIGURE 14
FIGURE 15
FIGURE 16