User guide

7
10
19 7
30
889
112322
5
422824 26 27 12 15 13 1729 31 35 18 36 43 37
39
38413240 20
25
1434 33
+-
33
1
33 4
3
6 62 1
222
LUBRICATION & ROUTINE MAINTENANCE
16.0
Lubrication Symbols
AF - ANTI-FREEZE
CC - COOLANT CONDITIONER
DF - DIESEL FUEL
EO - ENGINE FUEL
HF - HYDRAULIC FLUID
HM - MOLY LUBE (extreme pressure)
FAILURE TO USE GRADALL
HYDRAULIC FILTER ELEMENTS
COULD VOID WARRANTY
IMPORTANT NOTICE
Be certain to check extend chain
adjustment every 5 weeks or 250
hours and adjust as required. Chain
damage can occur if chain is not
adjusted properly.
SYMBOLS
= Lube Fitting
= Other Service
= Service Both Sides
LUBRICATION NOTICE
• After greasing machine, cycle all functions several times to distribute lubricants. Perform this maintenance
procedure without attachment or forks installed.
• Apply a light coating of engine oil to all linkage pivot points.
• Clean lubrication fittings before lubricating.
• Intervals shown are for normal (8-hour day) usage and conditions. Adjust intervals for abnormal usage and conditions.
• Drain engine and gear cases after operating when oil is hot.
• Check lubricant levels when lubricant is cool.
• Clean filter and air cleaner housing and reusable elements using solvent or diesel fuel. Dry components thoroughly
using lint free cloth.