Service Manual Instruction Manual

55
Section 6
Specifications
Torque Chart - PROA 352/382
ITEM DESCRIPTION/THREAD TORQUE
1 Pinion Nut - M24 x 1.5-6H 465-570 lb-ft (630-775 N•m)
2 Nut (Stud - Center Housing) M14 x 1.5-6H 120-150 lb-ft (160-205 N•m)
3 Capscrew (Differential Case) M10 x 1.5-8G 48-64 lb-ft (64-87 N•m)
4 Capscrew (Spiral Gear) M10 x 1.0-6G 66-75 lb-ft (90-100 N•m)
5 Capscrew (Pinion Cage) M12 x 1.75-8G 67-91 lb-ft (91-120 N•m)
6 Capscrew (Lock Adjuster Ring) M6 6G 80-115 lb-in (9.0-13.0 N•m)
7 Capscrew (Adjusting Nut Lock) M8 x 1.25-6G 17-23 lb-ft (23-30 N•m)
8 Capscrew (Brake Housing) M8 x 1.25-6G 19-26 lb-ft (26-36 N•m)
9 Capscrew (Brake Releaser) M12 x 1.75-6G 25-34 lb-ft (34-46 N•m)
10 Capscrew (Flange Adapter) .3750” x 16UNC2A 39.0-53.0 lb-ft (53-72 N•m)
11 Capscrew (Center Housing Cover) M8 x 1.25-6G 20-27 lb-ft (27-36 N•m)
12 Capscrew (Axle Shaft Flange) M20 x 1.5-6G 470-575 lb-ft (635-780 N•m)
13 Drain Plug 35 lb-ft (47 N•m)
14 Grease Fitting 31-40 lb-in (3.5-4.5 N•m)
15 Vent Plug 15 lb-ft (20 N•m)
16 Level Plug 35 lb-ft (47 N•m)
17 Capscrew (Planetary Pinion Axle) M10 x 1.5-6G 17-23 lb-ft (23-31 N•m)
18 Bolt (Action Plate) M6 x 1.5-6G 120-140 lb-in (13.5-16.0 N•m)
19 Capscrew (Return Spring) M6 x 1.0-6G 80-115 lb-in (9.0-13.0 N•m)