Service Manual Manual

Lower Hub onto Spindle with large open
end up.
Place Bearing cone #JM515649 over end of
Spindle and into Bearing Cone.
Place Bearing Shim over end of Spindle
and against Bearing Cone.
Secure Retaining Ring completely into
Spindle groove and against Bearing Shim.
Be sure that Retaining Ring is entirely in
groove.
Eye protection should be worn during
Retaining Ring installation.
The pipe plugs are installed in the Hub.
The us of lub-seal is recommended on
the pipe plug.
5.
6.
7.
8.
9.