Service Manual Manual

This Service Manual is a step-by-step
guide designed for the customer or shop
mechanic who is servicing or repairing a
particular model of Torque-Hub Final
Drive. (The model covered by this copy of
the Manual is specified on the Manual
cover.)
Included are—
At the time of printing, this Manual was
complete for the specific Torque-Hub
model designated. However, Fairfield
Manufacturing Co., Inc., reserves the right
to update and improve its products at any
time. All specifications and procedures
are therefore subject to change without
notice.
Safety
Standard safety practices should be
followed during the disassembly and
assembly procedures described. Safety
glasses and safety shoes should be worn;
heavy, heat resistant gloves should be
used when heated components are
handled. Be especially alert when you
see a caution symbol ( ). This symbol
indicates that a particular operation could
cause personal injury if not performed
properly or if certain safety procedures are
not followed.
Introduction
1. assembly and exploded view drawings
2. disassembly procedure
3. main assembly procedure (assuming
all sub-assemblies to be intact)
4. sub-assembly procedures.