User guide

Suggested Lubrication & Maintenance Frequencies
.
CG - Chassis Grease
HF - Hydraulic Fluid
EO - Engine Oil
GO - Gear Oil
ATF - Transmission Fluid
l - Lube
INS - Inspect & Fill
CH - Change
*#5 Boom Bearing Pads (extend boom fully and coat all wear paths on boom
sections 2 and 3 with light coat of grease-retract and extend boom fully three
times and wipe excess grease from bearings). Check for wear & shim or replace
as required-no wear permitted past bevel-shims are 1/16" thick
Hours