Service Manual User Manual

FOREWORD
This manual has been prepared to provide the customer and the
maintenance personnel with information and instructions on the mainten-
ance and repair of the CLARK-HURTH COMPONENTS product.
Extreme care has been exercised in the design, selection of materials and
manufacturing of these units. The slight outlay in personal attention and
cost required to provide regular and proper lubrication, inspection at
stated intervals, and such adjustments as may be indicated will be
reimbursed many times in low cost operation and trouble free service.
In order to become familiar with the various parts of the product, its
principle of operation, trouble shooting and adjustments, it is urged that
the mechanic study the instructions in this manual carefully and use it as a
reference when performing maintenance and repair operations.
Whenever repair or replacement of component parts is required, only Clark-
Hurth Components-approved parts as listed in the applicable parts
manual should be used. Use of “will-fit” or non-approved parts may
endanger proper operation and performance of the equipment. Clark-
Hurth Components does not warrant repair or replacement parts, nor
failures resulting from the use of parts which are not supplied by or
approved by Clark-Hurth Components. IMPORTANT: Always furnish the
Distributor with the serial and model number when ordering parts.